Page 138 - PROTEC PLASTICS UK 33
P. 138
Bolt and Nut Anti-Corrosion Snap Caps
For bolted joints without washers
With anti-vibration locking lip
Width across flats range from SW 10 to SW 130
All dimensions in mm
Dimensions (DIN ISO 4035, 8675) EP 810 Type -1-
Thread
DIN 439 Typ B
Widths across Flats Height Inside Height outside (DIN ISO 4032,8673, 8674) DIN 11 · UNC American National Standards Reference-No.
DIN 55 (DIN ISO 4034)
DIN 934
DIN 936
(DIN ISO 4035,8675)
DIN 972 (DIN ISO 4034)
Type
h
H
¹
SW 10 -1- 16.1 17.2 M 6 Metric Thread EP 810 / SW 10 – M 6 -1- G 16
SW 10 -1- 33.6 34.7 M 6 EP 810 / SW 10 – M 6 -1- G 34
SW 13 -1- 18.0 19.1 M 8 .1/ 4“ EP 810 / SW 13 – M 8 -1- G 18
Type -1- SW 13 -1- 27.0 28.6 M 8 .1/ 4“ EP 810 / SW 13 – M 8 -1- G 27
Standard Version SW 17 -1- 31.2 33.2 M 10 M 10 × 1 .3/ 8“ EP 810 / SW 17 – M 10 -1- G 29
for bolted joints SW 17 -1- 44.2 46.0 M 10 M 10 × 1 .3/ 8“ EP 810 / SW 17 – M 10 -1- G 45
without washers SW 19 -1- 31.1 32.9 M 12 M 12 × 1.5 .7/16“ EP 810 / SW 19 – M 12 -1- G 29
SW 19 -1- 50.0 52.0 M 12 M 12 × 1.5 .7/16“ EP 810 / SW 19 – M 12 -1- G 50
SW 24 -1- 34.2 36.3 M 16 M 16 × 1.5 .9/16“ EP 810 / SW 24 – M 16 -1- G 31
SW 24 -1- 50.5 52.0 M 16 M 16 × 1.5 .9/16“ EP 810 / SW 24 – M 16 -1- G 51
Material : SW 30 -1- 33.5 36.0 M 20 M 20 × 2 M 20 × 1.5 EP 810 / SW 30 – M 20 -1- G 34
LLD-PE,
linear low density polyethylene SW 30 -1- 116.0 118.0 M 20 M 20 × 2 M 20 × 1.5 EP 810 / SW 30 – M 20 -1- G 120
SW 36 -1- 72.6 75.0 M 24 M 24 × 2 M 24 × 1.5 .7/8“ EP 810 / SW 36 – M 24 -1- G 73
Standard Colour : SW 36 -1- 42.0 44.3 M 24 M 24 × 2 M 24 × 1.5 .7/8“ EP 810 / SW 36 – M 24 -1- G 43
black
SW 41 -1- 76.2 78.4 M 27 M 27 × 2 M 27 × 1.5 1.“ EP 810 / SW 41 – M 27 -1- G 76
• Resistant against chemicals SW 41 -1- 51.5 54.0 M 27 M 27 × 2 M 27 × 1.5 1.“ EP 810 / SW 41 – M 27 -1- G 46
• Temperature range, SW 46 -1- 148.0 151.0 M 30 M 30 × 2 M 30 × 1.5 1.1/8“ EP 810 / SW 46 – M 30 -1- G 144
resistant from -25°C up to +70°C
SW 46 -1- 50.7 53.0 M 30 M 30 × 2 M 30 × 1.5 1.1/8“ EP 810 / SW 46 – M 30 -1- G 49
Available in standard and extended SW 50 -1- 85.0 87.0 M 33 M 33 × 2 M 33 × 1.5 1.1/4“ EP 810 / SW 50 – M 33 -1- G 81
barrels. SW 50 -1- 56.0 58.0 M 33 M 33 × 2 M 33 × 1.5 1.1/4“ EP 810 / SW 50 – M 33 -1- G 51
SW 55 -1- 164.5 167.5 M 36 M 36 × 3 M 36 × 1.5 1.3/8“ EP 810 / SW 55 – M 36 -1- G 155
SW 55 -1- 56.8 60.0 M 36 M 36 × 3 M 36 × 1.5 1.3/8“ EP 810 / SW 55 – M 36 -1- G 55
SW 60 -1- 58.1 60.5 M 39 M 39 × 3 M 39 × 1.5 1.1/2“ EP 810 / SW 60 – M 39 -1- G 57
SW 60 -1- 109.4 113.0 M 39 M 39 × 3 M 39 × 1.5 1.1/2“ EP 810 / SW 60 – M 39 -1- G 107
SW 65 -1- 123.0 126.0 M 42 M 42 × 3 M 42 × 1.5 1.5/8“ EP 810 / SW 65 – M 42 -1- G 123
SW 65 -1- 62.7 64.6 M 42 M 42 × 3 M 42 × 1.5 1.5/8“ EP 810 / SW 65 – M 42 -1- G 61
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.
138 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk
