Page 140 - PROTEC PLASTICS UK 33

Bolt and Nut Anti-Corrosion Snap Caps

For bolted joints with washers
With anti-vibration locking lip
Width across Flats range from SW 10 to SW 105

All dimensions in mm
Dimensions of Thread EP 810 Type -2-
caps
DIN 439 Typ B
(DIN ISO 4035, 8675)
DIN 55 (DIN ISO 4034)
Widths across Flats Height Inside Height outside Thickness Washer (DIN ISO 4032,8673, 8674) Reference-No.
DIN 934
DIN 936
(DIN ISO 4035,8675)
DIN 972 (DIN ISO 4034)

Type -2- Type h ¹ H S Metric Thread
SW 10 -2- 17.8 19.1 1.6 M 6 EP 810 / SW 10 - M 6 -2- G 18
Extended Version
for bolted joints SW 13 -2- 28.6 30.2 1.6 M 8 .1/4“ EP 810 / SW 13 - M 8 -2- G 29
with washers SW 17 -2- 47.2 49.0 2.0 M 10 M 10 × 1 .3/8“ EP 810 / SW 17 - M 10 -2- G 47
SW 19 -2- 41.1 43.1 2.5 M 12 M 12 × 1.5 .7/16“ EP 810 / SW 19 - M 12 -2- G 40
SW 24 -2- 69.0 70.8 3.0 M 16 M 16 × 1.5 .9/16“ EP 810 / SW 24 - M 16 -2- G 69
SW 30 -2- 82.0 84.0 3.0 M 20 M 20 × 2 M 20 × 1.5 EP 810 / SW 30 - M 20 -2- G 82
Material : SW 36 -2- 121.4 123.8 4.7 M 24 M 24 × 2 M 24 × 1.5 .7/8“ EP 810 / SW 36 - M 24 -2- G 120
LLD-PE, SW 41 -2- 88.0 92.0 4.0 M 27 M 27 × 2 M 27 × 1.5 1.“ EP 810 / SW 41 - M 27 -2- G 80
linear low density polyethylene
SW 46 -2- 81.7 84.0 4.0 M 30 M 30 × 2 M 30 × 1.5 1.1/8“ EP 810 / SW 46 - M 30 -2- G 83
Standard Colour : SW 50 -2- 87.0 90.0 5.0 M 33 M 33 × 2 M 33 × 1.5 1.1/4“ EP 810 / SW 50 - M 33 -2- G 86
black SW 55 -2- 91.0 93.5 5.3 M 36 M 36 × 3 M 36 × 1.5 1.3/8“ EP 810 / SW 55 - M 36 -2- G 90
• Resistant against chemicals SW 55 -2- 163.0 173.0 5.0 M 36 M 36 × 4 M 36 × 1.5 1.3/8“ EP 810 / SW 55 - M 36 -2- G 160
• Temperature range, SW 60 -2- 105.0 107.0 6.0 M 39 M 39 × 3 M 39 × 1.5 1.1/2“ EP 810 / SW 60 - M 39 -2- G 93
resistant from -25°C up to +70°C SW 65 -2- 95.2 98.0 7.7 M 42 M 42 × 3 M 42 × 1.5 1.5/8“ EP 810 / SW 65 - M 42 -2- G 98

Available in standard and extended SW 70 -2- 100.0 102.0 7.0 M 45 1.3/4“ EP 810 / SW 70 - M 45 -2- G 100
barrels. SW 75 -2- 108.0 110.0 10.5 M 48 1.7/8“ EP 810 / SW 75 - M 48 -2- G 103
SW 80 -2- 138.0 141.0 8.0 M 52 2.“ EP 810 / SW 80 - M 52 -2- G 139
SW 85 -2- 83.0 86.0 9.0 M 56 EP 810 / SW 85 - M 56 -2- G 83
SW 90 -2- 84.3 86.3 10.1 M 60 2.1/4“ EP 810 / SW 90 - M 60 -2- G 83
SW 95 -2- 143.0 145.0 11.8 M 64 EP 810 / SW 95 - M 64 -2- G 140
SW 100 -2- 150.0 158.0 9.0 M 68 2.1/2“ EP 810 / SW 100 - M 68 -2- G 150
SW 105 -2- 162.5 167.0 9.0 M 72 EP 810 / SW 105 - M 72 -2- G 160
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

140 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk