Page 134 - PROTEC PLASTICS UK 33

Bolt and Nut Protection Caps

Effective protection against weathering , tampering, dirt and damage

All dimensions in mm

Suitable for hexagon nuts
Spanner Size DIN 936 (DIN ISO 4035, 8675) No.
DIN 555 (DIN ISO 4034)
Dimensions Width across Flats DIN 439 (DIN ISO 4035, 4036, 8675) Reference
DIN 934 (DIN ISO 4032, 8673, 8674)
Metric Thread
BSP EP 800/M …
DIN 11
d h ¹ h ² h ³ SW DIN 13 (BS 84) DIN 240
8.0 6.5 7.3 3.0 6.0 M 3.5 M 3.5 – SW 6
10.0 8.2 9.8 5.9 7.0 M 4 M 4 – SW 7
10.9 9.3 10.5 6.3 8.0 M 5 M 5 – SW 8
12.9 11.0 12.5 6.5 10.0 M 6 M 6 – SW 10
13.7 11.6 13.0 6.5 11.0 M 7 .1/ 4 M 7 – SW 11
16.8 14.0 15.0 7.0 13.0 M 8 M 8 × 1 M 8 – SW 13
20.6 17.5 19.5 9.0 17.0 M 10 M 10 × 1 .3/ 8 M 10 – SW 17
22.9 18.4 20.3 10.0 19.0 M 12 M 12 × 1.5 .7/16 M 12 – SW 19
26.4 22.0 23.7 12.0 22.0 M 14 M 14 × 1.5 .1/ 2 R .1/4“ M 14 – SW 22
29.4 23.0 26.0 12.0 24.0 M 16 M 16 × 1.5 M 16 – SW 24
34.0 29.0 30.6 17.0 27.0 M 18 M 18 × 2 M 18 × 1.5 .5/ 8 R .3/8“ M 18 – SW 27
Material : 36.0 30.0 32.6 16.7 30.0 M 20 M 20 × 2 M 20 × 1.5 M 20 – SW 30
LD-PE, 39.7 33.6 36.2 19.0 32.0 M 22 M 22 × 2 M 22 × 1.5 .3/ 4 W 20 × 1/10“ R .1/2“ M 22 – SW 32
low density polyethylene
43.8 35.5 39.2 20.0 36.0 M 24 M 24 × 2 M 24 × 1.5 .7/ 8 W 22 × 1/10“ R .5/8“ M 24 – SW 36
Standard Colour : 50.1 44.0 46.5 23.0 41.0 M 27 M 27 × 2 M 28 × 1.5 1.“ W 27 × 1/10“ R .3/4“ M 27 – SW 41
black 50.1 44.8 47.5 23.0 41.0 M 27 M 27 × 2 M 27 × 1.5 1.“ W 27 × 1/10“ R .3/4“ M 27 – SW 41
55.9 49.0 50.0 24.0 46.0 M 30 M 30 × 2 M 30 × 1.5 1.1/ 8“ W 30 × 1/10“ R .7/8“ M 30 – SW 46
These caps cover nuts and exposed
bolts and provide effective 60.5 53.0 55.5 26.2 50.0 M 33 M 33 × 2 M 33 × 1.5 M 33 – SW 50
protection against damage and 67.0 57.0 59.5 28.5 55.0 M 36 M 36 × 2 M 36 × 3 M 36 – SW 55
weathering and improve the finished
appearance of your product. 73.0 60.0 61.6 32.3 60.0 M 39 M 39 × 2 M 38 × 1.5 M 39 – SW 60
72.0 60.0 62.5 38.0 60.0 M 39 M 39 × 3 M 40 × 1.5 M 39 – SW 60
Easy to fit and to remove. 72.0 60.0 62.5 38.0 60.0 M 39 M 39 × 3 M 39 × 1.5 M 39 – SW 60
77.5 63.0 65.5 35.0 65.0 M 42 M 42 × 3 M 42 × 1.5 1.5/ 8“ M 42 – SW 65
85.5 70.0 72.0 33.0 70.0 M 45 1.3/ 4“ M 45 – SW 70
91.6 77.5 79.0 41.0 75.0 M 48 1.7/ 8“ W 48 × .1/8“ R 1.1/2“ M 48 – SW 75
98.0 82.6 84.6 43.5 80.0 M 52 2.“ W 52 × .1/8“ R 1.3/4“ M 52 – SW 80
104.2 88.6 91.6 48.0 85.0 M 56 2.1/ 4“ W 56 × .1/6“ M 56 – SW 85
116.7 102.0 105.5 55.0 95.0 M 64 2.1/ 2“ W 64 × .1/6“ R 2.1/4“ M 64 – SW 95
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

134 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk