Page 38 - PROTEC PLASTICS UK 33

Pipe Protection Caps

The Original. One piece construction. Injection – moulded. Up to 64.”
nominal pipe size. Complemented with over 170 additional sizes
Internal ribs provide tight fit and release pressure build up

All dimensions in mm
Dimensions
Colour Standard Pack Reference No.
D Nom H

100.0 40.0 natural 200 EP 260 / 100.0
101.6 42.0 yellow 200 EP 260 / 101.6
102.0 40.0 yellow 200 EP 260 / 102.0
103.0 39.0 natural 175 EP 260 / 103.0
105.0 39.0 Natur 200 EP 260 / 105.0
106.0 42.0 yellow 175 EP 260 / 106.0
108.0 38.0 yellow 200 EP 260 / 108.0
Material : 108.5 90.0 yellow 60 EP 260 / 108.5 × 90
LLD-PE, 110.0 38.0 yellow 175 EP 260 / 110.0
linear low density polyethylene 114.3 R 4." 38.0 yellow 150 EP 260 / 114.3
114.3 90.0 natural – EP 260 / 114.3 × 90
Standard Colours :
yellow, natural 116.3 38.0 grey 150 EP 260 / 116.3
117.5 38.0 natural 150 EP 260 / 117.5
The Original 121.0 37.2 yellow 150 EP 260 / 121.0
One piece construction
Injection-moulded 125.0 38.0 yellow 150 EP 260 / 125.0
126.0 37.2 natural 150 EP 260 / 126.0
Up to 64.” nominal pipe size and 127.0 R 4.1/2" 39.0 yellow 140 EP 260 / 127.0
complemented with over 170 additi-
onal sizes. Internal ribs provide tight 130.0 40.0 natural 130 EP 260 / 130.0
fit and release pressure build up. 133.0 40.0 yellow 125 EP 260 / 133.0
133.7 96.0 yellow 40 EP 260 / 133.7 × 90
136.0 30.0 natural 150 EP 260 / 136.0
139.7 R 5." 38.0 yellow 100 EP 260 / 139.7
141.3 41.4 yellow 110 EP 260 / 141.3
146.0 41.3 natural 100 EP 260 / 146.0
149.0 40.0 natural 100 EP 260 / 149.0
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

38 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk