Page 40 - PROTEC PLASTICS UK 33

Large Pipe Protection Caps

Up to 64” nominal pipe sizes and complemented with over 170 additional sizes
Internal ribs provide tight fit and release pressure build up

All dimensions in mm
Dimensions
Colour Standard Pack Reference No.
D Nom H

323.9 R 12." 55.0 yellow 25 EP 260 / 323.9
355.6 R 14." 57.0 yellow 27 EP 260 / 355.6
368.0 55.0 yellow 30 EP 260 / 368.0
400.0 65.0 natural 25 EP 260 / 400.0
406.4 R 16." 62.0 yellow 30 EP 260 / 406.4
419.0 54.0 yellow 25 EP 260 / 419.0
450.0 66.0 natural 28 EP 260 / 450.0
457.2 R 18." 66.0 yellow 32 EP 260 / 457.2
Material : 508.0 R 20." 65.3 yellow 26 EP 260 / 508.0
LLD-PE, 558.8 R 22." 60.0 yellow 22 EP 260 / 558.8
linear low density polyethylene
609.6 R 24." 65.5 yellow 20 EP 260 / 609.6
Standard Colours : 660.4 R 26." 102.0 black 10 EP 260 / 660.4
yellow, natural, black 711.2 R 28." 115.0 black 10 EP 260 / 711.2
762.0 R 30." 115.0 black 10 EP 260 / 762.0
These high quality injection moulded
protection caps are suited to the 812.8 R 32." 115.0 black 10 EP 260 / 812.8
most severe weather conditions due 863.6 R 34." 153.0 black 6 EP 260 / 863.6
to the use of UV stabilised material 914.4 R 36." 115.0 black 10 EP 260 / 914.4
and the reinforced design.
An additional entrylip also allows 1016.0 R 40." 115.0 black 8 EP 260 / 1016.0
easy fitting and removal. 1066.8 R 42." 102.0 black 6 EP 260 / 1066.8
1117.6 R 44." 115.0 black 6 EP 260 / 1117.6
1219.2 R 48." 115.0 black 6 EP 260 / 1219.2
1320.8 R 52." 150.0 black 6 EP 260 / 1320.8
1422.4 R 56." 146.0 black 6 EP 260 / 1422.4
1524.0 R 60." 150.0 black 6 EP 260 / 1524.0
1625.6 R 64." 150.0 black 4 EP 260 / 1625.6
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

40 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk