Page 34 - PROTEC PLASTICS UK 33

Pipe Protection Caps

The Original. One piece construction. Injection – moulded. Up to 64.”
nominal pipe size. Complemented with over 170 additional sizes
Internal ribs provide tight fit and release pressure build up

All dimensions in mm
Dimensions

Colour Standard Pack Reference No.
D Nom H

4.0 22.0 yellow 5.000 EP 260 / 4.0
5.0 18.7 natural 20.000 EP 260 / 5.0
6.0 18.9 yellow 5.000 EP 260 / 6.0
6.35 13.0 yellow 5.000 EP 260 / 6.35
7.0 18.6 yellow 5.000 EP 260 / 7.0
8.2 17.2 yellow 10.000 EP 260 / 8.0
9.6 14.0 yellow 5.000 EP 260 / 9.6
10.2 R .1/8" 18.6 yellow 8.000 EP 260 / 10.2
Material : 11.0 19.0 yellow 15.000 EP 260 / 11.0
LLD-PE, 12.0 18.5 yellow 15.000 EP 260 / 12.0
linear low density polyethylene 12.7 19.3 yellow 13.500 EP 260 / 12.7
Standard Colours : 13.0 18.7 yellow 5.000 EP 260 / 13.0
yellow, natural 13.7 R .1/4" 18.4 yellow 5.000 EP 260 / 13.7
14.0 18.6 yellow 5.000 EP 260 / 14.0
The Original
One piece construction 15.0 19.1 yellow 5.000 EP 260 / 15.0
Injection-moulded 16.0 19.8 yellow 5.000 EP 260 / 16.0
17.2 R .3/8" 20.2 yellow 5.000 EP 260 / 17.2
Up to 64.” nominal pipe size and
complemented with over 170 additi- 18.0 20.0 yellow 5.000 EP 260 / 18.0
onal sizes. Internal ribs provide tight 19.0 20.0 yellow 6.000 EP 260 / 19.0
fit and release pressure build up. 20.0 20.0 yellow 5.000 EP 260 / 20.0
21.3 R .1/2" 20.0 yellow 5.000 EP 260 / 21.3
22.0 20.0 yellow 5.000 EP 260 / 22.0
23.2 19.0 yellow 4.500 EP 260 / 23.2
24.0 18.4 yellow 4.000 EP 260 / 24.0
24.8 16.9 natural 4.000 EP 260 / 24.8
25.0 50.0 yellow 1.000 EP 260 / 25.0 × 80
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

34 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk