Page 78 - PROTEC PLASTICS UK 33

Push-In Flange Face Protectors

Guard the flange face DN 15 – DN 300
Suited to protect DIN and ANSI flanges

Example of application

All dimensions in mm
Material :
LLD-PE, Flange Flange Dimensions
linear low density polyethylene d Lamellar Reference No.
Dim. DIN ² d D H h Qty.
Standard Colour : min. max.
yellow
.1/2" DN 15 11.0 18.5 18.5 44.8 16.0 15.0 3 EP 306 / DN 15
Ribbed Face Protectors guard .3/4" DN 20 16.0 23.0 24.0 58.0 16.0 15.0 3 EP 306 / DN 20
the flange face against dirt,
moisture, paint, sand and short 1." DN 25 21.0 29.0 30.0 70.0 19.0 18.0 3 EP 306 / DN 25
blasting. 1.1/4" DN 32 30.0 37.0 39.0 78.0 29.0 28.0 3 EP 306 / DN 32
1.1/2" DN 40 37.0 43.0 45.0 88.0 29.0 28.0 3 EP 306 / DN 40
The tapered section of the part
creates a strong adhesion to 2." DN 50 43.0 54.0 55.5 102.1 20.1 18.5 2 EP 306 / DN 50
various classifications of flanges, 2.1/2" DN 65 61.0 71.0 72.5 122.0 33.5 33.0 3 EP 306 / DN 65
no fasteners required. 3." DN 80 74.0 83.0 85.0 138.0 34.0 33.0 3 EP 306 / DN 80
4." DN 100 80.0 110.0 112.0 162.0 34.5 35.0 2 EP 306 / DN 100
5." DN 125 100.0 135.0 137.5 189.0 34.8 35.0 2 EP 306 / DN 125
6." DN 150 130.0 167.0 172.0 215.0 36.4 35.0 2 EP 306 / DN 150
8." DN 200 180.0 216.0 217.2 270.0 45.1 43.1 2 EP 306 / DN 200
10." DN 250 232.0 267.0 270.9 345.0 45.1 43.1 2 EP 306 / DN 250
12." DN 300 285.0 316.0 325.0 408.0 45.1 43.1 3 EP 306 / DN 300
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

78 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk