Page 76 - PROTEC PLASTICS UK 33

Push-In Full-Face Flange Protectors

The Original. The most universal Push-In Protectors in the market
Low cost full face flange protection with flexible fins, which ensure a snug fit
into bores. Per size – these protectors can be used on a variety of classifica-
tions
All dimensions in mm
Dimensions Dimensions Standard Reference No.
Nom D d ¹ d ² H Pack
DN 10 .3/8 86.0 13.7 7.00 15.0 1.000 EP 305 / DN 10 HF
DN 15 .1/2 90.0 19.0 9.00 15.0 1.000 EP 305 / DN 15 HF
DN 20 .3/4 101.0 24.0 14.40 20.0 700 EP 305 / DN 20 HF
DN 25 1. 110.0 30.0 18.00 20.0 500 EP 305 / DN 25 HF
DN 32 1.1/4 136.0 39.0 22.27 20.0 300 EP 305 / DN 32 HF
DN 40 1.1/2 146.0 45.0 30.00 20.0 250 EP 305 / DN 40 HF
DN 50 2. 160.0 56.0 40.10 20.0 200 EP 305 / DN 50 HF
DN 65 2.1/2 180.0 72.0 53.40 20.0 200 EP 305 / DN 65
DN 80 3. 196.0 85.0 67.60 25.0 150 EP 305 / DN 80
DN 100 4. 216.0 109.0 88.60 25.0 100 EP 305 / DN 100
DN 125 5. 247.7 134.0 110.20 25.0 75 EP 305 / DN 125
DN 150 6. 283.0 161.0 135.69 35.0 40 EP 305 / DN 150
DN 200 8. 337.0 211.0 188.60 41.3 40 EP 305 / DN 200
DN 250 10. 390.0 262.0 243.80 41.0 28 EP 305 / DN 250
DN 300 12." 450.0 318.0 280.90 48.0 20 EP 305 / DN 300
DN 400 16. 586.0 410.0 351.00 62.0 10 EP 305 / DN 400

EN 12351-A.3
DIN 3443, Form A
BASF WN 14-150, A Example of application
All dimensions in mm
d 1 DIN 2627 – 26 38 / BS 4504 ANSI B 16.5 / BS 1560
Dimensions Reference No.
Material : Nom min. max. PN 10-16 PN 25-40 CI. 150-300
LLD-PE, PN 64 PN 100 PN 160 PN 250 PN 300 PN 400 CI. 400 CI. 600 CI. 900 CI. 1500 CI. 2500
linear low density polyethylene DN 10 .3/8“ 9.0 13.6 EP 305 / DN 10 HF
DN 15 .1/2" 12.5 17.3 EP 305 / DN 15 HF
Standard Colour :
yellow DN 20 .3/4" 17.5 22.3 EP 305 / DN 20 HF
DN 25 1." 21.5 28.5 EP 305 / DN 25 HF i. Flange = d2 / d2 = nom. bore i. Flange = d2 / d2 = nom. bore
The Original DN 32 1.1/4" 28.5 37.2 EP 305 / DN 32 HF
These low cost full face flange
protectors are the most universal in DN 40 1.1/2" 37.0 43.1 EP 305 / DN 40 HF
the market. Hi-Flexx Ribs ensure a DN 50 2." 47.5 54.5 EP 305 / DN 50 HF
tight fit into the center bore. DN 65 2.1/2" 63.5 70.3 EP 305 / DN 65
Can be used on a variety of
different sized flanges and flange DN 80 3." 76.0 82.5 EP 305 / DN 80
classifications. DN 100 4." 97.0 107.1 EP 305 / DN 100
DN 125 5." 118.0 131.7 EP 305 / DN 125
DN 150 6." 148.0 159.3 EP 305 / DN 150
DN 200 8." 184.0 208.0 EP 305 / DN 200
DN 250 10." 238.0 260.4 EP 305 / DN 250
DN 300 12." 285.0 315.0 EP 305 / DN 300
DN 400 16." 355.0 408.0 EP 305 / DN 400
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

76 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk