Page 70 - PROTEC PLASTICS UK 33

Valve Flange Protection Plugs

Provides cushioned protection for flange face
Suitable for DIN 2402 flanges
DN 10 – DN 400

Type A
(parallel plug design)

Type B
(conical ribbed plug design)

All dimensions in mm
DIN Dimensions Standard
2402 d d Plug Design D H Pack Reference No.
Material : ¹ ²
LLD-PE, DN 10 7.6 10.9 conic 40.0 9.7 5.000 EP 300 / 010 - R
linear low density polyethylene DN 15 12.2 16.8 conic 45.0 10.0 5.000 EP 300 / 015 - R
DN 20 16.1 22.5 conic 58.3 14.5 2.000 EP 300 / 020 - R
Standard Colour :
yellow DN 25 20.1 26.0 conic 68.0 15.0 1.500 EP 300 / 025 - R
DN 32 26.5 33.5 conic 78.6 14.6 1.000 EP 300 / 032 - R
Provides cushioned protection for DN 40 34.5 41.5 conic 89.0 15.0 700 EP 300 / 040 - R
flange face. Suitable for DIN 2402
flanges. DN 50 45.0 51.6 conic 103.5 15.0 500 EP 300 / 050 - R
DN 65 58.5 66.0 conic 122.0 20.0 250 EP 300 / 065 - R
These plugs have a tapered body DN 80 74.0 81.0 conic 138.8 20.0 200 EP 300 / 080 - R
and a wide flange to protect the
entire machined surface of valve DN 100 94.0 103.0 conic 162.0 20.4 100 EP 300 / 100 - R
flange. DN 125 118.0 127.0 conic 188.0 20.0 125 EP 300 / 125 - R
DN 150 144.0 153.2 conic 215.0 20.3 80 EP 300 / 150 - R
DN 200 194.5 204.5 conic 268.0 25.0 60 EP 300 / 200 - R
DN 250 247.0 252.0 conic 344.0 25.0 50 EP 300 / 250
DN 300 303.0 parallel 408.0 20.5 52 EP 300 / 300
DN 350 355.0 parallel 455.0 21.0 50 EP 300 / 350
DN 400 406.0 parallel 510.0 23.0 40 EP 300 / 400
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

70 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk