Page 54 - PROTEC PLASTICS UK 33

Tapered Protection Plugs

Selection Guide for HD-PE GASPIPE

All dimensions in mm
HD-PE Pipe
Dimensions Reference No.
DA × Wall Thickness
20 × 1.9 EP 280 -  12 Red
20 × 2.8 EP 280 -  10 Red
25 × 1.8 EP 280 -  18 Red
25 × 2.3 EP 280 -  17 Red
25 × 3.5 EP 280 -  14 Red
32 × 1.9 EP 280 -  24 Red
32 × 3.0 EP 280 -  22 Red
32 × 4.5 EP 280 -  19 Red
40 × 2.3 EP 280 -  28 Red
40 × 3.7 EP 280 -  27 Red
40 × 5.6 EP 280 -  34 Red
50 × 2.9 EP 280 -  32 Red
50 × 4.6 EP 270 - TK 398 Red
Material : 50 × 6.9 EP 280 -  28 Red
LLD-PE,
linear low density polyethylene 63 × 3.6 EP 280 -  36 Red
63 × 5.8 EP 270 - TK 498 Red
Standard Colour : 63 × 8.7 EP 280 -  33 Red
red for HDPE Gas Pipes
75 × 4.3 EP 270 - TK 650-S Red
Tapered design allows the plug to 75 × 6.9 EP 280 -  39 Red
cover multiple inside diameters 75 × 10.4 EP 280 -  36 Red

For Gas pipes, Plastics pipes, Steel 90 × 5.1 EP 270 - TK 790-S Red
pipes, Internal threads and bore 90 × 8.2 EP 270 - TK 728 Red
holes. 90 × 12.5 EP 270 - TK 650-S Red
110 × 6.3 EP 270 - TK 965 Red
110 × 10.0 EP 270 - TK 890-S Red
110 × 15.2 EP 270 - TK 790-S Red
125 × 7.1 EP 270 - TK 1060-S Red
125 × 11.4 EP 270 - TK 990-S Red
125 × 17.3 EP 270 - TK 890 Red
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

54 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk