Page 206 - PROTEC PLASTICS UK 33

Materials and Colours

Material Characteristics

Material Designation Hardness

LLD-PE Linear Low Density Polyethylene soft / elastic / tension-free
LD-PE Low Density Polyethylene soft / elastic
HD-PE High Density Polyethylene hard / elastic
EVA Ethylene vinyl acetate very soft / elastic
PHT Thermoplastic polyester elastomer soft / elastic
TPE Thermoplastic polyester elastomer extremely soft / elastic
SI Silicone extremely soft / elastic
PP Polypropylene hard / stiff
PA 6 Polyamide 6 hard / tough
PA 6 GF 30 Polyamide 6 glass fibre reinforced hard
PA 6.6 Polyamide 6.6 hard / tough
PA 6.6 GF 35 Polyamide 6.6 glass fibre reinforced very hard

©
CAPTOP , DURASAFE and QUICKFIT Plastic Parts are predominantly manufactured from polyethylene (LD-PE, HD-PE),
©
©
polypropylene (PP) and nylon (PA6). This involves the use of carbon and hydrogen. These plastic parts are completely recyclable.
Please refer to the individual product descriptions in this catalogue for further properties. For special requirements of a mecha-
nical, thermal or chemical nature, we can also manufacture in a wide choice of other materials. Please contact us with further
details of your specific needs.
Chemical Resistance

 resistant  non-resistant

Material

Weak acids Weak alkalis Alcohol Solvents Fuels Mineral oils Greases Water, hot

LLD-PE        
LD-PE        
HD-PE        
EVA        
PHT        
TPE        
SI        
PP        
PA 6        
PA 6 GF 30        
PA 6.6        
PA 6.6 GF 35        

206 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk