Page 20 - PROTEC PLASTICS UK 33

Driveshaft Protection Caps with Fitting Key

Heavy duty protection for cylindrical driving shafts
including fitting key
DN 9 – DN 75

All dimensions in mm
Shaft Dimension Protection Cap
Diameter Standard Reference No.
Pack
Material : W D H
LLD-PE, 9.0 14.5 24.0 15.000 EP 190 / W 9
linear low density polyethylene
11.0 17.5 27.5 8.000 EP 190 / W 11
Standard Colour : 14.0 22.5 35.0 4.500 EP 190 / W 14
yellow 15.0 25.5 32.0 4.500 EP 190 / W 15
16.0 25.5 47.0 2.700 EP 190 / W 16
Fit driveshafts with a protruding
fitting key. 19.0 30.7 47.0 1.700 EP 190 / W 19
20.0 32.0 58.5 1.500 EP 190 / W 20
Provide protection and masking of 22.0 35.5 58.5 1.000 EP 190 / W 22
driveshafts as well as the surroun-
ding bearings. 24.0 38.5 58.5 900 EP 190 / W 24
25.0 40.0 70.0 700 EP 190 / W 25
Resistant to tearing, splitting, oil 28.0 45.0 70.0 600 EP 190 / W 28
and most chemicals.
30.0 48.0 93.5 350 EP 190 / W 30
Fits drive shafts to specification 32.0 51.0 93.5 500 EP 190 / W 32
DIN 748, IEC 600-72 and ISO R775.
35.0 56.0 93.5 400 EP 190 / W 35
‘Easypull’ design makes removal 38.0 61.0 93.5 350 EP 190 / W 38
easy. 42.0 67.0 127.5 230 EP 190 / W 42
45.0 72.0 117.5 200 EP 190 / W 45
48.0 77.0 127.5 170 EP 190 / W 48
55.0 88.0 127.5 125 EP 190 / W 55
60.0 96.0 164.0 80 EP 190 / W 60
65.0 104.0 164.0 60 EP 190 / W 65
75.0 112.0 164.0 50 EP 190 / W 75
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

20 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk