Page 176 - PROTEC PLASTICS UK 33

Quick-Fit EMC Cable Glands, Brass, Nickel plated

Rapid EMC connection of the cable shield through contact spring inside
gland body and the electric potential of the installation.
Built-in twisting protection, wide sealing and clamping range

Cable glands play an important part in safeguarding EMC requirements where cables and
leads enter into a shielding system.
They must ensure a durable permanent connection with very small Ohm‘s and inductive
resistance between the cable shield and the housing potential.
Our QUICK-FIT EMC cable glands fulfil these requirements in an outstanding way.

The assembly of the type EPN 705 succeeds simply and fast:
1. Partially expose the braid by removing the outer sheath of the cable of
approximately 10 mm.
2. Insert the cable through the domed nut and the gland body until the contact spring is
pressed against the braided screen.
3. Firmly screw on domed nut.
Material : 4. Due to this principle it is possible to conduct the braided screen of the EMC cable
Brass,
nickel plated through the entire gland body up to the clamping are of the inner wires.
Blade insert : An additional improvement of the equipotential bonding and the vibration protection
Polyamide PA6 V-2 can be improved further by using our EPN 715 hexagon nut with cutting edges obtained.
Sealing ring :
Polychloroprene-Nitrile rubber
CR/NBR See page 180
O-Ring :
Nitrile rubber NBR
Protection class : All dimensions in mm
IP68
Rapid EMC connection of the ca- Thread size Clamping Length Depth Spanner
ble shield through contact spring range of thread size Reference-No.
inside gland body and the electric
potential of the installation. Built-in AG K L H SW
twisting protection, wide sealing
and clamping range. M 16 × 1.5 5.0 – 9.0 5.0 30.0 17 EPN 705 / M 16 × 1.5
M 20 × 1.5 9.0 – 13.0 6.0 33.1 22 EPN 705 / M 20 × 1.5
M 25 × 1.5 11.0 – 16.0 7.0 35.0 27 EPN 705 / M 25 × 1.5
M 32 × 1.5 14.0 – 21.0 8.0 39.0 34 EPN 705 / M 32 × 1.5
M 40 × 1.5 19.0 – 27.0 8.0 41.7 43 EPN 705 / M 40 × 1.5
M 50 × 1.5 24.0 – 35.0 9.0 50.1 55 EPN 705 / M 50 × 1.5
M 63 × 1.5 32.0 – 42.0 10.0 52.5 65 EPN 705 / M 63 × 1.5
Should your requirements not be shown please ask for a separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

176 0191 442 42 42 0191 442 42 22 www.protecinfo.co.uk